Stained Concrete Floors in Melbourne, FL: Color Your Existing Slab Instead of Covering It
We stain concrete in homes and businesses across Melbourne, West Melbourne, Palm Bay and Brevard County. See which slabs suit staining and what it typically costs, then get a free estimate.
Licensed and insuredFree estimatesMon–Fri, 7am–7pm
You pulled up the old carpet or tile and found a concrete slab. Or the patio or lanai has been plain gray for years.
You could cover it with something new. Or you could color the concrete you already have.
That's what staining does. It adds color to the concrete itself, and a sealer goes on top to protect it.
Acid stain or water-based stain?
Concrete stains come in two main kinds, and they don't look the same.
- Acid stain reacts with the concrete. The result is mottled and uneven, like stone or leather, and every slab takes it a little differently. The color range is narrower, mostly earth tones.
- Water-based stain soaks into the surface and gives more even, more predictable color, with a wider range.
Neither one is better. We work with both, so you can pick by the look you want.
Want a glossy, ground finish instead? That's polished concrete. Garage floor? See concrete garage floors.
Can my concrete be stained?
Stain is see-through. It colors the slab but doesn't hide it, so what's on the surface shows through.
Staining usually works well when:
- The slab is solid and fairly clean.
- You like a natural, varied look.
- The floor can be cleaned down to bare concrete.
Things that show through the stain:
- Glue and adhesive left from carpet or tile, unless it's fully removed.
- Patches and old repairs. They take stain differently from the concrete around them.
- Cracks. Stain colors them. It doesn't hide them.
- Old paint or sealer. It blocks the stain and has to come off first.
If the surface is badly damaged, it may need repair or resurfacing first. We'll tell you before you spend anything.
How is concrete stained?
- Clean and prep. Adhesive, paint and old sealer come off, and the floor is cleaned down to bare concrete.
- Apply the stain. It can be one color or layered.
- Clean up. Acid stains are neutralized and rinsed.
- Seal. A sealer protects the color and sets the sheen.
The prep takes the longest, and it's what decides how the floor looks.
What does concrete staining cost?
These are published market estimates, not our prices. No Florida-specific figure is published by the national guides, so the main figures are national.
| Job | Typical market range | Source (checked Sep 2026) |
|---|---|---|
| Staining existing concrete floors | about $3–$15 per sq ft | HomeGuide national cost guide, Feb 2026 |
| Staining an existing patio | about $3–$10 per sq ft | HomeGuide national cost guide, Feb 2026 |
Central Florida guides report about $3–$7 per sq ft for a basic stain (Linked Concrete, Aug 2026).
Actual project pricing requires a free estimate.
Here's what moves your number:
- Prep. Glue and paint removal adds the most.
- Size.
- Colors and design. More colors and layering cost more.
- The sealer.
What should you ask before comparing staining quotes? Ask each contractor about:
- how the floor will be prepped;
- which stain type and how many colors;
- which sealer;
- whether a test spot is included.
Two quotes built on different assumptions can't be compared. Tell us what you want, and we'll write it down and use it for your free quote. It's a written quote, itemized if you'd like.
Floors, patios and lanais
We stain interior floors and outdoor concrete like patios and lanais.
Outdoors, stained concrete sits in the Florida sun, so the sealer matters. Ask how it holds up and how often it needs renewing.
Frequently asked questions
Are these your prices?
No. They're published market estimates, and we list the source. Your actual price comes from a free estimate.
Will stain hide cracks or stains?
No. Stain is see-through, so cracks, patches and old stains show through. Some people like that character. If you don't, ask about the other options for garage floors or resurfacing. Cracks are filled first, and they can still show.
Does stained concrete need to be sealed?
Yes. The sealer protects the color. How often it needs renewing depends on the sealer and the traffic.
Is stained concrete slippery?
A sealed floor can be slick when wet. Ask about a slip-resistant additive, especially for outdoor areas.
Stained or polished: what's the difference?
Staining adds color and a sealer on top. Polishing grinds the concrete itself to a smooth, shiny finish. They can be combined, so ask if you want both.
How do I take care of a stained floor?
Sweep it, and damp-mop it with a gentle cleaner. Renew the sealer when it starts to look worn.
Can I choose an exact color?
With water-based stain, you get closer to a set color. Acid stain varies from slab to slab. Ask for a test spot on your own floor before the whole job.
Send us a photo of the floor.
Include a close-up of the surface, so we can see any glue, patches or cracks. We'll tell you how it's likely to take a stain, then set up a free estimate. You'll get a written quote, itemized if you'd like.
Licensed and insuredFree estimatesMon–Fri, 7am–7pm